10CAG/10CHG/10CGGHz CHANNEL RADIO CONTROL SYSTEM INSTRUCTION MANUAL Technical updates and additional programming examples. Instruction manual • Read online or download PDF • Futaba 10CG GHz User Manual. Futaba 10CHG Pdf User Manuals. View online or download Futaba 10CHG Instruction Manual.
|Published (Last):||23 April 2008|
|PDF File Size:||20.9 Mb|
|ePub File Size:||10.73 Mb|
|Price:||Free* [*Free Regsitration Required]|
Detailed instructions for use 1chg in the User’s Guide. Using Twin Aileron Servos: Setting up the Normal Flight Condition In order for you to make the best use of your system manual, our online Frequently Asked Questions on the web pages referenced belowyour hobby dealer, or the Futaba Service Center. There are many pages of setup procedures and examples. However, it need not be your sole resource of setup guidelines for your 10CG.
FUTABA 10CAG INSTRUCTION MANUAL Pdf Download.
For example, pages include setup instructions for a basic 4-channel airplane. The Frequently Asked Questions web page referenced below includes this type of step-by-step setup instructions for a variety of other model types, including multiengine, complex gear installation, 7-servo aerobatic models, degree CCPM, etc. Due to unforeseen changes in production procedures, the information contained in this manual is subject to change without notice.
It is recommended to have your Futaba equipment serviced annually during your hobby’s “off season” to ensure safe operation. Please be sure to programming, use, set up and safety information on the 10CG radio system and is updated regularly. Any technical there, please see the end of our F.
Don’t have Internet access? Internet access is available at no charge at most public libraries, schools, and other public future reference, and can be accessed at any hour of the day, night, weekend or holiday.
Futaba 10CG 2.4GHz User Manual
If you do not wish to access the internet for information, however, don’t worry. Manuxl support teams are available Monday through Friday Central time to assist you. Futaba Service Center N. Please recognize that all information in this manual, and all support availability, is based upon the systems sold in North America only.
Products purchased elsewhere may vary. Always contact your region’s support center for assistance. Ftuaba product may be used for model airplane or surface boat, car, robot use. It is not intended for use in any application other than the control of models futxba hobby and recreational purposes.
The product is subject to regulations of the Msnual 2. If this product 10cgh then re-exported to other countries, it may be subject to restrictions on such export. Prior approval of the appropriate government authorities may be required. If you have purchased this product from an exporter outside your country, and not the authorized Futaba distributor in your mankal, please contact the seller immediately to determine if such export regulations have been met.
This equipment must not be utilized to operate equipment other than radio controlled models. Any such changes may void the warranty.
Compliance Information Statement for U. Operation is subject to the following two conditions: You’re reading an excerpt. TEL or E-mail: SEAL on the nickel-cadmium battery contained in Futaba products indicates that Futaba Corporation of America is voluntarily participating in an industry-wide program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States.
Futaba Corporation of America’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources. WARNING – Procedures which may lead to a dangerous condition or cause death or serious injury to the user if CAUTION – Procedures where the possibility of serious injury manjal the manuual is small, but there is a danger of injury, or physical damage, if not carried out properly.
Optional trainer cord 10chv. Requires receiver of proper modulation. Defaults to ACRO model type. The “High Speed mode” only accept the digital servos for outputs fitaba 1ch to 6ch, including BLS series, and most peripheral equipments such as the gyros or brushless ESCs.
The frame rate of the outputs manua, 7ms. The outputs for other channels indicated below allow to use any type of servos as the frame rate of these mznual are still 14ms on the High Speed mode. Pulse width control, 1. Additionally, while many peripheral devices will operate in either the high speed or normal mode, some will not.
For Operation Mode Fuhaba, see p. Refer to a Futaba catalog for more information: Insertion of a CAMPac containing data of a different transmitter type ex: Note that the 10CG transmitter may be connected to another 10CG system, as well as to many other models of Futaba transmitters.
The 10CG transmitter uses the newer micro plug rectangular type cord plug. Both new-to-new and new-to-round plug style trainer cords are available. Automatically adjusts throttle servo position to maintain a constant head speed regardless of blade pitch, load, weather, etc.
ON You can change many of the switch positions or functions by selecting a new position within the setting menu for the function you wish to move. If you need to remove or replace the transmitter battery, do not pull on its wires to remove it. Instead, gently pull on the the transmitter. For example, the channel 5 servo, which defaults to SWITCH E for retract use, can easily be unassigned NULL to allow for easy use as a second rudder servo in a mix, or to a slider or manuxl for msnual door or other control.
Always check that you have the desired switch assignment for each function during set up. For consistency, the switch position’s designation remains the same upper left is F, etcbut the functions are moved to match the switch type. Connect the transmitter charging jack and airborne NiCd batteries to the transmitter and receiver connectors of the charger. Plug the charger into a wall socket. Check that the charger LED lights. Charger The initial charge, and any charge after a complete discharge, should be at least 18 hours to ensure full charge.
Transmitter charging indicator RX: Receiver charging indicator To transmitter charging jack We recommend charging the batteries with the charger supplied with your system. Note that the use of a fast charger may damage the batteries by overheating and dramatically reduce their lifetime. Receiver Ni-Cd battery You should fully discharge your system’s NiCd batteries periodically to prevent a condition called “memory”.
Cycling should be done every four to eight weeks, even during the winter or periods of long storage. Keep track of the batteries capacity during cycling; if there is a noticeable change, you may need 10chb replace the batteries.
To lengthen or shorten your transmitter’s A counterclockwise. Next, move the locking piece B up or down to lengthen or shorten. When the length feels comfortable, lock the position by turning locking piece B counterclockwise. First, remove the battery cover on the rear of the transmitter. Next, unplug the battery wire, and remove the battery from the transmitter. Next, using a screwdriver, remove the four screws that hold the transmitter’s rear cover in position, and put them in a safe place.
Gently ease off the transmitter’s rear cover. Now you’ll Using a small Phillips screwdriver, rotate the adjusting screw for each stick for the desired spring tension. The tension increases when the adjusting screw is turned clockwise. Reinstall the battery and cover. Use the DIAL to change this to the correct mode.
Note that this will NOT change the throttle and elevator rachets, etc. Those are mechanical changes that must be done by a service center. THR-REV is a special function that reverses the entire throttle control, including moving the trim functionality to the stick’s upper half. Turn the transmitter off and back on.
This change affects all models in the radio. Change this to the desired language. Area Selection Frequency Range: The T10CG transmitter has been designed to function in many countries. We have installed a special “Power Down Mode” for doing a ground range check.
During this mode, the RF power is reduced so the range test can be performed. In addition, when this mode is activated the blue LED on the front of the transmitter starts blinking and the transmitter gives users a warning with a beep sound every 3 seconds.
The “Power Down Mode” continues for 90 seconds and after that the power will return to the normal level. This mode is available one time only so if you need to reuse this function the transmitter power must be cycled and the “Power Down Mode” reset.
During this mode, the RF power is turned off.
The blue LED on the front of the transmitter is turned off. When unplugging connectors, never pull on the wires. Always pull on the plastic connector instead.
Additional Futaba extension cords of varying lengths are available from your fuaba dealer. Always use an extension of the proper length. Avoid plugging multiple extensions together to attain your desired length. If distance is greater than 18″ or multiple or high current draw servos are being used, use Futaba Heavy-Duty servo extensions.
Furaba not over tighten the screws.